
Add to Cart
Car gps navigation tracker real-time locating and remote control engine
Specifications
Input Fuse | 5A |
CPU | TI:MSP430F5419(100MHz) |
GSM Module | simcom 850/1900MHZ900/21000MHZ 850(800)2100MHZ EDGE multislot class 12 operation, Supports coding schemes |
GPS Module | GPS Chip: SiRF Star 4 Reacquisition: 0.1 sec, average Hot boot: 2 sec., average Warm boot: 38 sec., average Cold boot: 44 sec., average Altitude limit: 18000 m Velocity limit: 515 m/s |
7 I/O input Port | 1 port use to check the engine ( ACC check) 1 port use to SOS 1 A/D Input port( Fuel monitoring) 1 Output port ( Car engine control ) 3 Extend ports ( Input/Output control by software) |
Current | Not working Current 16mA working Current:60~150mA Current of opening infrared of Camera at night :100~200mA Charging current: Max<500mA |
Two RS232 | One is connect to the camera (130M pixel) Other is extending ports, can connect to GPS Navigator/RFID Reader/LED Screen. |
Microphone | 3.5mm single track |
earphone | 3.5mm |
SIM: card port
Phone: headphone port
MIC: to listen
LED1: power indicator light (RED)
LED2: status indicator light(Green)
RESET: Reset Button
1.Quick flash is initialization. It shows GPS and GSM Abnormal.
2.1 second on, 1 second off shows GPS abnormal.
3.0.1 second on, 3 seconds off shows GPS normal.
4.Keeping on shows the system normal.
Features
1.support route66/IGO etc. maps
2.take photo and image transmit
3.fuek check/monitor
4.real-time locating/inquiry
5.sos button/power-cut alarm
6.listen by telephone
7.geo-fence/over-speed alarm
8.remote control engine
Application:
Taxi,bus,tour bus,logistics team management ect.